BTB printing press

characteristic:

The MPM Momentum BTB is a space-saving device that is 200mm shorter than the standard Momentum. The total length of the two devices is 2.8 meters. Can be configured in a BTB back-to-back format, for example, when two separate devices are placed back-to-back on a production line, the capacity of the two devices is combined to achieve dual-channel printing, saving floor space and creating a shorter production line without sacrificing output or quality. Rate. The Momentum BTB is designed so that the entire electrical system, solvent reservoirs, etc. are all accessible from the front of the machine, so when installed back to back, no additional operating space between equipment is required.

MPM Momentum BTB printing press parameters:

Larger substrate size (XxY): 609.6mmx508mm (24”x20”)

Minimum substrate size (XxY): 50.8mmx50.8mm (2”x2”)

Substrate thickness size: 0.2mm (0.008") to 5.0mm (0.20"),

Maximum substrate weight: 4.5kg (9.92lbs)

Substrate edge clearance: 3.0mm (0.118")

Bottom clearance: 12.7mm (0.5") standard, 25.4mm (1.0") configurable

Substrate clamping: fixed top clamping, table vacuum, EdgeLoc (optional)

Substrate support method: bench vacuum, magnetic ejector pin, vacuum ejector pin, support block, optional special clamp (less tools) or optional Grid-Lok

Machine weight: Momentum BTB797kg (1757lbs)